Fuel and Air Systems—FA210D/Remove and Install Carburetor CTM5 (20OCT92) 20-06-4 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=45 REMOVE AND INSTALL CARBURETOR—FA210D-AS19-01 -UN-06APR91 M80280 A—Crankcase C—Choke Control Linkage G—Intake Pipe J—Fuel Tank-to-Carburetor Breather-to-Intake Pipe D—Air Cleaner Base H—Gasket Fuel Hose Hose E—Cap Screw (3 used) I—Carburetor K—Gasket B—Gasket F—Cap Screw and Washer (2 used) 1. Remove air cleaner elements. 7. Make repairs as necessary. (See this group.) 2. Disconnect linkage (C). 8. Install carburetor and new gasket. 3. Remove cap screws (E), air cleaner base (D) and 9. Install intake pipe and new gasket. gasket (B). 10. Connect hoses.
4. Disconnect hoses (A and J). Close all openings using caps and plugs. 11. Install air cleaner base and new gasket. 5. Remove cap screws and washers (F), intake pipe 12. Connect linkage. (G) and gasket (H). 13. Install air cleaner elements. 6. Remove carburetor (I) and gasket (K). MX,2006A1,A6 -19-21OCT92 20 06 4