John Deere K Series Air-Cooled Engines — DISASSEMBLE RECOIL STARTER—FA130D-AS16/AS19

Group 30 Starting Systems—FA130D N CAUTION: A loaded spring operates under great pressure. Make sure spring tension between reel and housing is released before removing reel. 8. Turn the reel one half turn clockwise so no spring tension can be felt. M80273 -UN-11MAR91 9. Spring is stored in reel. Carefully remove while holding spring in underside of reel. 10. Inspect starter for wear or damage. (See this group.) MX,2030A1,A2 -19-21OCT92 CTM5 (20OCT92) 20-30-1 K Series Air Cooled Engine AllTractorManuals.com 220596 PN=88 DISASSEMBLE RECOIL STARTER—FA130D-AS16/AS19 1. Remove starter. 2. Pull handle out about 30 cm (1 ft). Tie knot (A) to -UN-11MAR91 prevent rope from winding back onto reel. 3.

Pry knot (B) out of handle and untie. 4. Remove handle from rope. M80272 5. While holding reel with thumb, untie knot (A). Slowly release reel tension. Do not let rope get wedged between reel and housing. N CAUTION: Wear gloves and protective goggles for remaining steps. 6. Remove cap screw (C) and ratchet cover. 7. Remove pawl and springs. MX,2030A1,A1 -19-21OCT92 20 30 1