191 therefore advisable to depress the brake pedal before selecting position "D". In this position the gearbox will automatically shift up and down in all forward gears. In the "1", "2" and "3" positions the gearbox shifts up to the selected gear. These positions are used to keep the engine within the proper speed range or to obtain the maximum engine brake performance. Gearbox The ECU will block the functions of the selector lever and ensure that the gearbox will select a "safe gear". It is important to drive the vehicle to a safe place as soon as possible and switch the ignition off. It will no longer be possible to shift the gearbox to neutral. The ECU will prevent this.
After approximately 30 seconds, try starting the engine again and engaging a gear. If the fault is one whereby the gearbox must in no circumstances be shifted, the ECU will no longer shift the gearbox. Driving is therefore no longer possible! Reverse If position "R" is chosen the vehicle will also be immediately set in motion. In this case, too, first depress the brake pedal and then select "R" position. Faults If the transmission fault warning symbol lights up in the master display, a fault has been detected in the gearbox. Read the following recommendations first or consult an authorized dealer if necessary. Automatic Gearbox