Use of the engine brake When the engine brake is operated in third or higher gear, the ECU will shift down to second gear as soon as the engine speed permits to do so. Using the PTO If the vehicle is fitted with a PTO, this can be switched on in both neutral and first gear (depending on the version). PTO operation is, however, not permitted in Drive when the vehicle is being held stationary by the service brake or parking brake. In this case, shift to neutral in order to prevent overheating. Depending on the version, the electronic unit will shift the gearbox to neutral if a command is given to do so.
Faults If the transmission fault warning symbol in the master display lights up, there is a fault in the gearbox (shifting gears), or the temperature of the gearbox oil is too high. This is in order to allow the engine brake to deliver maximum braking force. The accompanying fault code can be read in the selector display function. Read the following recommendations first or consult an authorized dealer if necessary. The selector display shows the second gear selected by the ECU. Automatic Gearbox 196