DAF LF — Replacing the poly-V belt

3. Slacken the poly-V-belt (C) (see arrow in illustration), so that it can be removed from the pulleys. 4. Carefully allow the automatic belt tensioner to spring back to the stop. 5. Push the poly-V-belt between the fan and the wind tunnel collar and remove the poly-V-belt. 6. Check all pulleys over which the poly-V-belt runs for dirt, rust and damage. 7. Fit a new poly-V-belt between the fan and wind tunnel collar. Place the poly-V- belt over as many pulleys as possible. 8. Tension the automatic belt tensioner and place the poly-V-belt over the remaining pulleys. Carefully allow the automatic belt tensioner to spring back against the new poly-V-belt. 9.

Check that the poly-V-belt is in all pulley grooves. 10. Connect the earth lead to the battery. Emergency repairs D001177 210