If the LED is off (A), the vehicle may be started. If the LED flashes slowly (B), the alarm system has been activated. If the LED flashes quickly (C), a self-test will be carried out or an error message is given by means of a flashing code. If the system raised an alarm, the cause can be determined via the system LED by reading the flashing code (C). This indication is displayed for 30 seconds after the system has been deactivated with button (2) of the hand-held transmitter.
6 Superstructure/trailer loadspace detection 8 Superstructure/trailer loadspace detection 4 Cab detection approximation switch 11 Radar sensor, interior detection 2 Ultrasonic, interior detection 5 Power supply after contact 10 Detection, co-driver's door 3 Detection, driver's door 9 Interrupted wire Alarm System THE SYSTEM LED Flashing code Circuit D000483 A B C Flashing code Circuit 2 Ultrasonic, interior detection 3 Detection, driver's door 4 Cab detection approximation switch 5 Power supply after contact 6 Superstructure/trailer loadspace detection 8 Superstructure/trailer loadspace detection 9 Interrupted wire 10 Detection, co-driver's door 11 Radar sensor, interior detection