V-belt pulley add-on TCD 2013 2V W 05-01-01 ●Mount V-belt tension measuring device on V-belt. The V-belt must be between the guides (arrow). 6 © 44050-0 ●Press the V-belt measuring device against the V-belt with the button (1) until you hear it click. ●Read measured value at the intersection (arrow) of the indicator arm and scale. Operation manual Note different units on the scale. ●If the nominal value is not reached, the tensioning process must be repeated. 1 © 44051-0 ●Tighten screw (arrow). 30 Nm © 44052-0 © 02/2010 OBJ_DOKU-21755-001.fm 9/12