Torsional vibration damper TCD 2013 2V W 05-02-01 Removing and installing torsional vibration damper (V-belt drive) Standard tools 6 Removing the torsional vibration damper ●Unscrew all screws (1). ●Remove the torsional vibration damper. ●Visually inspect the components. 1 1 1 © 44436-0 Installing the torsional vibration damper ●Mount the torsional vibration damper. Note installation position. The holes in the torsional vibration damper must match the threaded holes in the V- belt pulley. Attention! The following new screws without washers must be used when the torsional vibration damper is removed or changed. See the spare parts documentation. M10x20-12.9 ●Tighten screws alternately.
without washer 70 Nm © 44437-0 © 02/2010 OBJ_DOKU-21756-001.fm 1/2