Crankshaft TCD 2013 2V W 05-05-01 ●Remove bearing cap (1). ●Remove bearing shell. ●Remove both thrust ring halves (arrows). ●Remove all main bearing covers (2). ●Remove bearing shells. 1 Lay out components in the order in which they should be installed. Note order of cylinders. 2 6 © 44228-0 ●Press the con rods carefully out of the lifting journal. ●Lift out the crankshaft. © 44230-0 ●Remove both thrust ring halves (arrows). ●Remove bearing shells (1) and (2). Lay out components in the order in which they should be installed. Note order of cylinders. 2 ●Visually inspect the components. ●Check axial backlash of crankshaft (crankshaft re - moved).
1 W 05-05-03 © 44231-0 © 02/2010 OBJ_DOKU-21758-001.fm 4/12