Crankshaft TCD 2013 2V W 05-05-01 ●Position camshaft. The bore (1) must be facing the cylinder head. ●Lightly oil bearing surfaces. 1 6 © 44237-0 ●Insert the crankshaft carefully in the crankcase. Attention! Do not jam the con rods when inserting the crankshaft! ●Set the crankshaft in line with the camshaft. Make sure that the markings match up. © 44238-1 ●Check control times. The marking (1) on the crankshaft flange must be in line with your mark (2). 1 2 © 44446-0 © 02/2010 OBJ_DOKU-21758-001.fm 7/12