Cylinder head TCD 2013 2V W 08-00-01 Checking the compression pressure Standard tools: Compression pressure tester 8005 Torx tool set 8189 W 11-01-01 W 19-01-01 Special tools: Connector 100190 6 Checking the compression pressure ●Setting the valve clearance (with exhaust return module installed). W 11-01-01 ●Remove injector. W 19-01-01 ●Insert connector (1). Use sealing ring for injector. 1 © 44100-0 ●Mount clamping shoe (1). ●Tighten screw (2). 25 Nm When installing the connector on cylinders 1 to 5, the clamping shoe must be inserted together with the connector. 1 2 © 44101-0 © 02/2010 OBJ_DOKU-21765-001.fm 1/4