DEUTZ engines User notes ●When removing and installing components, no materials which can leave behind particles or fi - bres (cardboard, wood, cloths) may be used. newed parts / operating materials must be stored, transported and disposed of according to regula - tions. The owner himself is responsible for this. ●Removed parts may only be rubbed down with clean, lint-free cloths. No dirt particles may be rubbed into the components. Disposal includes recycling and the scrapping of parts / operating materials, although recycling has priority. ●Openings on the components and on the engine must be closed immediately with suitable stop - pers/caps.
Details of disposal and their monitoring are gov - erned by regional, national and international laws and directives which the system operator must ob - serve on his own responsibility. 3 ●The stoppers/caps may only be removed imme - diately before installing. ●Store stoppers/caps free from dust and dirt in the original packaging and dispose of after using once. ●Only remove new parts from the original packag - ing just before installation. ●Removed components must be kept in new, seal - able bags or - if available - in the packaging of the new parts. ●Always use the original packaging of the new part to send back the removed components.
Notes and measures for the vehicle workshop area ●For work such as removal and installation on de - fective hydraulic components on the Common Rail System it is recommended to partition off a separate workshop area in the factory. This must be separate from other areas in which general vehicle repairs such as brake repairs are carried out. ●The workshop floor is sealed or tiled. ●No welding gear, grinders, general machine tools, brakes or performance test benches may be operated in this room. ●Regular cleaning of the workshop area is manda - tory. Draughts, ventilation systems and heating fans should be minimised.
Notes and measures for workbench and tools in the vehicle hall ●A special workbench must be set up for work on removed components. ●Clean the removal and installation tools regularly and keep them in a closed tool cabinet. ●Remove loose parts (for example paint chips from assembly work) with an industrial vacuum cleaner or other suction device. ●Working materials and tools must be cleaned be - fore work. Only use tools without damage to the chrome plating or tools which are not chrome- plated. 3.2.3 Disposal regulations The work described in the operation manual and workshop manual necessitates renewal of parts and operating materials among other things.
The re - © 02/2010 OBJ_DOKU-21740-001.fm 5/8