Gearcase TCD 2013 2V W 09-01-01 Renewing the crankshaft sealing ring (flywheel side) Standard tools: Pricker 8198 Assembly lever 9017 W 05-03-01 Special tools: Assembly tool 142810 Self-tapping screw Washer 6 Removing the crankshaft sealing ring ●Remove flywheel. W 05-03-01 ●Make a hole of approximately 3 mm in the crankshaft sealing ring with a pricker. Attention! Do not damage the gearcase cover and crankshaft. © 44188-0 ●Turn in a self-tapping screw with washer. © 44189-0 © 02/2010 OBJ_DOKU-21775-001.fm 1/4