Deutz — Removing and installing the camshaft

Camshaft TCD 2013 2V W 10-02-01 ●Push on and align the flywheel side assembly block. ●Install clamping holder (1) on adapter boards (2). 90 Nm 1 1 2 2 6 © 44472-0 ●Unhook the crankcase from the workshop crane. ●Unscrew screws (1). 1 1 © 44471-0 ●Install crankshaft. W 05-05-01 ●Install rocker arms and rocker arm brackets. W 11-02-01 ●Install high pressure pump and roller tappet (installa - tion position B). W 17-01-05 ●Install high pressure pump and roller tappet (installa - tion position A). W 17-01-04 © 44220-0 © 02/2010 OBJ_DOKU-21777-001.fm 4/4