Deutz — Setting valve clearance (with exhaust return module installed)

Control parts TCD 2013 2V W 11-01-01 Setting valve clearance (with exhaust return module installed) Standard tools: Rotation angle disc 8190 Screwdriver insert for slot - ted screws 8191 Screwdriver insert for hexagon socket head screws (4 mm) 8194 Open wrench size 13 8196 W 08-01-01 W 49-02-01 Allow the engine to cool down for at least 30 minutes before setting the valve clearance. Engine oil temperature The control piston clearance of the exhaust return line must be set after setting the valve clearance. Special tools: Crowfoot wrench size 15 103140 6 Setting engine to valve overlap ●Remove the cylinder head hood. W 08-01-01 ●Attach turning gear.

W 49-02-01 ●Turn crankshaft using the turning gear until the valve overlap of cylinder 1 is reached. © 44110-0 Setting valve and control piston clearance 4-cylinder Valve overlap: Outlet valve is not yet closed, inlet valve begins to open. When the outlet valve is fully open, the inlet valve opens briefly approx. 2 mm. This is not the valve overlap! © 02/2010 OBJ_DOKU-21780-001.fm 1/8 Ignition sequence: 1 - 3 - 4 - 2 Valves Cylinders overlap 1 3 4 2 set to 4 2 1 3