Deutz — Setting valve clearance (with exhaust return module installed)

Control parts TCD 2013 2V W 11-01-01 Technical Data Testing and setting data Tightening specifications 6 For the tightening procedure according to torque using a torque wrench, a maximum variation of the tightening torque of +/- 10% is permissible. © 02/2010 OBJ_DOKU-21780-001.fm 8/8 ID no. Name Additional information Value P01 61 Valve clearance (inlet) with rotary angle disc 90° P01 62 Valve clearance (outlet) with rotary angle disc 150° P01 64 Clearance between control piston and rocker arm with rotary angle disc 144° ID no.

Name Screw type Notes / Remark Value A01 003 Locking nut, valve clearance setting screw 20 Nm A01 012 Locking nut, setting screw control pis- ton (exhaust gas return) 20 Nm