Deutz — Removing and installing the high-pressure pump (Installation position B)

High-pressure pump TCD 2013 2V W 17-01-05 ●Push the O-ring (1) with assembly sleeve (2) up to the groove (3). ●Coat the O-ring, mounting bore and chamfers in the crankcase with fitting compound. 1 2 3 6 © 43330-0 ●Insert the high-pressure pump carefully in the crank - case. © 43992-0 ●Oil the screws (1) lightly and tighten alternately until the high-pressure pump is flush with the crankcase. Do not tighten the screws yet. 1 1 2 © 43991-0 © 02/2010 OBJ_DOKU-21788-001.fm 5/10