Injector TCD 2013 2V W 19-01-01 Technical Data Tightening specifications 6 For the tightening procedure according to torque using a torque wrench, a maximum variation of the tightening torque of +/- 10% is permissible. © 02/2010 OBJ_DOKU-21789-001.fm 10/10 D no. Name Screw type Notes / Remark Value A07 001 Injector on cylinder head, clamping claw Stage 1: Observe order of assembly. Install injector without tension. hand tight A07 001 Injector on cylinder head, clamping claw Stage 2: 27 Nm A07 003 Injection pipe on rail and injector, High pressure pipe on high pressure pump and rail Union nut Stage 1: Observe assembly specification. Use new pipe.
10 Nm A07 003 Injection pipe on rail and injector, High pressure pipe on high pressure pump and rail Union nut Stage 2: 60° +15° A13 041 Cover plate on cylinder head cover M6x16 self-tapping 8.5 Nm A13 051 Cable connection on injector 1.5 Nm