Fuel filter TCD 2013 2V W 20-01-01 ●Mount the fuel pipe with new sealing rings. ●Tighten hollow screw (arrow). 39 Nm 6 © 43968-0 ●Mount fuel pipe. ●Tighten hollow screw (arrow) with new sealing rings. Check hose pipes and renew if necessary. 1 ●Position pipe clip. ●Tighten screw (1). M8 30 Nm ●Tighten hollow screw (arrow). 39 Nm © 43969-0 ●Press the cable plug onto the fuel pressure sensor. ●Turn in the locking ring (1) until it snaps in. 1 Make sure that the contacts match up. © 43970-1 © 02/2010 OBJ_DOKU-21790-001.fm 4/6