Deutz — Removing and installing the rail

Fuel pipes TCD 2013 2V W 21-02-01 Removing and installing the rail Standard tools: Rotation angle disc 8190 User notes W 21-02-03 W 21-02-05 Special tools: Special wrench 110500 Plugs/caps 170160 Danger! Wait 30 seconds after switching off the engine before working on the fuel system. Attention! Ensure utmost cleanliness when working on the fuel system. Carefully clean the area around the affected parts. Blow damp areas dry with compressed air. Observe the safety regulations and natio - nal specifications for handling fuels. Close all connections immediately after opening with new, clean plugs/caps. Do not remove plugs/caps until immedia - tely before assembling.

Collect leaking operating fluids in suitable vessels and dispose of according to regu - lations. After all work on the fuel system, it must be bleeded - see the operation manual, chap - ter "6 Fuel system“. 6 Removing the rail Danger! Wait 30 seconds after switching off the engine before working on the fuel system. © 43954-0 © 11/2010 OBJ_DOKU-21792-001.fm 1/8