Fuel pipes TCD 2013 2V W 21-02-01 Attention! Install high pressure line without tension. Pay attention to alignment of the high pres - sure pipes. Pipes which touch the bore (1) of the union nut must be renewed. 1 6 © 48223-0 ●Tighten union nuts (1) with special wrench. Stage 1: 10 Nm Use rotaqtion angle disc. Stage 2: 60° + 15° 1 ●Check high pressure pipes for perfect installation po - sition. 1 © 44020-0 ●Mount fuel return pipe (1). ●Tighten hollow screw (arrow) with new sealing rings. 39 Nm Bleed the fuel system via the manual fuel pump on the fuel pre-filter according to the operation manual. 1 © 43982-0 © 11/2010 OBJ_DOKU-21792-001.fm 6/8