Deutz — Removing and installing the rail pressure sensor

Fuel pipes TCD 2013 2V W 21-02-05 Removing and installing the rail pressure sensor Standard tools User notes Special tools: Long socket wrench insert 110700 Plugs/caps 170160 Danger! Wait 30 seconds after switching off the engine before working on the fuel system. Assembly grease 01016496 Attention! Ensure utmost cleanliness when working on the fuel system. Carefully clean the area around the affected parts. Blow damp areas dry with compressed air. No foreign bodies may get into the rail. Ensure utmost cleanliness. Especially on the thread and the sealing surface of the rail. Observe the safety regulations and natio - nal specifications for handling fuels.

Close all connections immediately after opening with new, clean plugs/caps. Do not remove plugs/caps until immedia - tely before assembling. After all work on the fuel system, it must be bleeded - see the operation manual, chap - ter "6 Fuel system“. 6 Removing the rail pressure sensor Danger! Wait 30 seconds after switching off the engine before working on the fuel system. ●Unlock cable plug (1) and remove. 1 ●Unscrew the rail pressure sensor (2) with the socket wrench. Collect draining fuel and dispose of according to regulations. 2 © 43977-0 © 02/2010 OBJ_DOKU-21794-001.fm 1/2