Deutz — Removing and installing the coolant pump (V-belt drive)

Coolant pump TCD 2013 2V W 37-03-01 ●Unscrew screws (1). ●Remove V-belt pulley (2). 1 2 6 © 44514-0 ●Unscrew screws (1). ●Unhook the fuel supply pump at the side. ●Remove clamping strap (2) and fuel supply pump. ●Remove thermostat housing. W 38-02-01 1 2 © 44515-0 ●Unscrew screws (arrows). ●Remove coolant pump (1). ●Remove gasket. 1 © 44516-0 © 02/2010 OBJ_DOKU-21796-001.fm 4/8