Coolant pump TCD 2013 2V W 37-03-01 ●Tighten the screws according to the tightening se - quence. 30 Nm Tightening order: screw (1), then screw (2), then the other screws in any order. 2 ●Install thermostat housing. W 38-02-01 1 6 © 44518-0 ●Mount clamping strap (2) with fuel supply pump. ●Tighten screws (1). Do not tighten screws. 1 2 © 44515-0 ●Mount V-belt pulley (2). ●Fasten screws. 1 2 © 44514-0 © 02/2010 OBJ_DOKU-21796-001.fm 6/8