Deutz — Removing and installing the turbocharger

Exhaust gas turbocharger TCD 2013 2V W 43-01-01 ●Visually inspect the components. 6 © 44282-0 Installing the turbocharger ●Clean sealing surfaces. ●Coat new pin bolts with DEUTZ S1 mounting com - pound. 2 ●Mount new pin bolts with locking nuts. ●Tighten pin bolts (1). 10 Nm ●Mount new gasket. ●Mount turbocharger (2). ●Tighten all nuts. 42 Nm 1 © 44283-1 ●Mount lubrication oil line (1). Use new sealing rings. 2 ●Tighten hollow screws (2). 39 Nm 1 2 © 44284-0 © 02/2010 OBJ_DOKU-21805-001.fm 3/6