Generator TCD 2013 2V W 44-02-01 Removing and installing the generator (V-belt drive) Standard tools: V-belt tension measuring device 8115 Operation manual Attention! Only test / tighten / renew V-belts when the engine is not running. The V-belt tension of new V-belts must be checked after they have been running for 15 minutes. 6 Removing the generator ●Disconnect the battery's negative terminal. ●Remove cable from generator. Note assignment! - (1) = terminal W - (2) = terminal D+ 3 1 - (3) = terminal B+ 2 © 44429-0 ●Loosen screws (1). 1 1 1 © 44038-0 © 02/2010 OBJ_DOKU-21806-001.fm 1/4