Deutz — Installing and removing turning gear

Tools TCD 2013 2V W 49-02-01 ●Clean the sealing surface on cover and gearcase. ●Insert new O-ring (arrow). ●Lightly oil O-ring. 6 © 43983-0 ●Press in the cap to the stop. Note different screw lengths. See spare parts documentation. ●Tighten screws (arrows). 21 Nm © 43984-0 ●Fit holder (1). ●Fit sleeve (2). ●Position spacing sleeve (3). ●Tighten screws (4). 30 Nm 3 1 2 3 4 2 © 43950-2 © 02/2010 OBJ_DOKU-21817-001.fm 3/4