Start aid TCD 2013 2V W 63-01-01 Technical Data Tightening specifications For the tightening procedure according to torque using a torque wrench, a maximum variation of the tightening torque of +/- 10% is permissible. 6 © 02/2010 OBJ_DOKU-21821-001.fm 3/4 D no. Name Screw type Notes / Remark Value A06 042 Heating flange on charge air manifold M8x100-10.9 Stage 1: 3 Nm A06 042 Heating flange on charge air manifold M8x100-10.9 Stage 2: 30° A13 065 Cable connection on heater flange Hexagonal, pole screw locked 20 Nm