Start aid TCD 2013 2V W 63-02-01 ●Feed cable (1) through assembly tool (2). 1 2 6 © 48219-0 ●Unscrew heating plug (1) with assembly tool. ●Visually inspect the component. 1 © 48220-0 Installing the glow plugs ●Screw in heating plug (1). ●Tighten heating plug (1) with assembly tool. 20 Nm ●Install the injectors. W 19-01-01 1 © 48220-0 © 02/2010 OBJ_DOKU-21822-001.fm 2/4