Deutz — Removing and installing the front cover (opposite side to flywheel)

Front cover TCD 2013 2V W 01-03-01 ●Fix the new gasket to the crankcase with a little grease. Note installation position. Make sure the clamping bushing (1) is in place. 1 6 © 44545-0 ●Oil oil pump with lubricating oil. © 44546-0 ●Position the inner rotor on the crankshaft. The countersinks on the crankshaft and the guides on the inner rotor must match (arrows). The inner rotor and crankshaft only match up in one position. © 44547-0 © 02/2010 OBJ_DOKU-21747-001.fm 3/6