Front cover TCD 2013 2V W 01-03-01 ●Turn engine 180°. ●Lay cable between front cover and coolant pump (ar - row). 6 © 44552-0 ●Mount clamping strap. ●Tighten screws (1). 30 Nm ●Install crankshaft sealing ring (opposite side to fly - wheel) W 01-02-01 1 ●Install V-belt pulley. W 05-01-01 © 44553-0 ●Mount holder with impulse transmitter. ●Fasten screws. Clean the threads of the screws and holes. Pay attention to different screws: Screws M8 x 45 mm (1) Screws M8 x 40 mm (2) 1 Insert screws with locking agent. Do not tighten screws. 2 © 44091-0 © 02/2010 OBJ_DOKU-21747-001.fm 5/6