Crankcase TCD 2013 2V W 01-05-01 Checking the overhang of the cylinder liner 8190 Standard tools W 08-03-01 Special tools: Dial gauge 100400 Measuring device 100750 6 Checking the overhang of the cylinder liner ●Remove cylinder head. W 08-03-01 The cylinder liner must be pressed in the crankcase to the stop. ●Place shims (1) and measuring beam (2) on the seal - ing surface of the crankcase. 2 ●Insert dial gauge into measuring beam. ●Fix dial gauge with knurled nut. 1 © 44071-0 ●Apply stylus of the dial gauge to the crankcase seal - ing surface with pre-tension (arrow). ●Adjust dial gauge to "0". © 44072-0 © 02/2010 OBJ_DOKU-21748-001.fm 1/2