Deutz — Removing and installing the lubricating oil pan (metal sheet lubricating oil pan)

Lubricating oil sump TCD 2013 2V W 02-01-01 Attention! Wear protective glasses. ●Clean the sealing surface on the lubricating oil pan with a wire brush. The sealing surfaces must be dry and free from grease and dirt. 6 © 45972-0 ●Apply packing compound evenly to the sealing sur - face and in the beading of the lube oil tray. Apply the packing compound in an even bead (thickness approx. 3.5 mm). The position of the packing compound is only partly illlustrated. © 43451-0 ●To align the lubricating oil pan, screw four pin bolts (1) diagonally opposed into the crankcase. ●Align the lubricating oil pan in the appropriate instal - lation position with the pin bolts. 1 ●Mount lubricating oil pan.

Attention! Do not move the lubricating oil pan any more. Observe the drying time for the packing compound. ●Unscrew the pin bolts. © 45678-0 © 02/2010 OBJ_DOKU-21752-001.fm 4/6