SAFETY Drive Safely with Bucket Loaded If the machine is operated incorrectly while driving with the bucket loaded, the machine may turn over. Be sure to follow all of the instructions indicated below. When driving the machine on a job site with the bucket loaded, hold the bucket as low as possible to keep the machine balanced and to have good visibility. Do not exceed the rated load capacity. Always operate the machine within the rated load capacity. Avoid fast starts, stops, and quick turns. Failure to do so may result in personal injury and / or death. Avoid rapid drive direction changes which could possibly SA-400 cause personal injury and / or death.
Drive on Snow Safely Beware of the possibility of slipping or turning over the machine when driving on frozen snow surfaces. The machine may slip more easily than expected on frozen snow surfaces even if the incline is small. Reduce speed when driving. Avoid fast starts, stops and quick turns. Road shoulder and / or set-up utilities covered with snow are difficult to locate. Be sure where they are before removing snow. Be sure to use tire chains when driving on snow. Avoid applying the brake for quick stops on snow. If a SA-452 quick stop is required, lower the bucket to the ground. S-14