SEAD042KD200 WA450-2 Wheel Loader

MAIN MENU

Operation & Maintenance SEAM042KD2 Manual WHEEL LOADER SERIAL NUMBERS WA450 :A25001 and UP KOMAlbU

Page 1

MAIN MENU

MACHINE MODEL NAME 8, MACHINE SERIAL NO ENGINE MODEL NAME B ENGiNE SEAiN NO QUICK REFERENCE INFORMATION DISTRIBUTORS NAME & TELEPHONE NO PERIODIC SERVICE lTEM DATE SERVICE METER DELIVERY PERIODIC PERIODIC PERIODIC CONSUMABLE PARTS

Page 2

MAIN MENU

Page 1 FOREWORD lubrication, maintenance, checking, and adjustment, It will help the operator or anyone realize peak performance through effective, economical and safe machine operation and maintenance. This manual describes procedures for operation, handling, . Please read this manual carefully BEFORE operating the machine. - Please continue studying this manual until proper operation is completely reinforced into personal habit. . This manual describes the basic techniques. Skill is performed as the operator or anyone get the correct knowledge and performance of the machine.

- Operation, inspection, and maintenance should be carefully carried out, and the safety must be given the first priority. Safety precautions are indicated with A marks and technical precautions with * marks in this manual. The safety information contained In this manual is intended only to supplement safety codes, insurance requirements, local laws, rules and regulations. - Some photographs and illustration pictures are different from your machine as technical improvement is continuously reflected on it. Revision to up-to-date manual’s content is performed in later editions.

- This operation & maintenance manual may contain attachments and optional equipment that are not available in your area. Please consult your local distributor for those items you may require. Materials and specifications are subject to change without notice. - NOTE See Cummins Engine Company Ltd. manual + Operation and Maintenance Manual LlO Series Engines (Bulletin No. 3810239-03)

Page 3

MAIN MENU

Page 2 BREAKING IN YOUR NEW MACHINE Each machine is carefully adjusted and tested before shipment. However, a new machine requires careful operation during the first 100 hours to break in the various parts If a machine is subjected to unreasonably hard use at the initial operation stage, the potential of performance will prematurely deteriorate and the service life will be reduced A new machine must be operated with care, particularly with regard to the following items. s After starting, let the engine idle for 3 to 5 minutes to allow proper engine warm-up prior to actual operation - Avoid operation with heavy loads or at high speeds .

Sudden starting or acceleration, unnecessarily abrupt braking and sharp turnmg should be avoided . At the first 250 hours of operation, the machine should be maintained in the following manner I” addi!lon to usual 250 hours service. 1) Replacement of transmission oil filter element * When replacing oil filter elements (cartridges), check their Interiors for dirt and dust If heavlly collected, check for possible cause before startmg operation. For replacement procedure and details, see maintenance table in the maintenance sectlon * Hours of operation are indicated by the service meter

Page 4