Section 8 Electrical REMOTE PTO/THROTTLE HARNESS This option provides a connection from the engine ECU for remote control of engine throttle and PTOs. Options that extend the wiring to the end of frame also exist, however controls are not provided. A 12-pin Deutsch connector (Deutsch P/N DT06-12SA-P012) is included. See Table 8-3 below for wiring harness connector pin outs. If customers need PTO controls (electrical connection between the PTO switch and engine), recommend the factory utilize sales codes to install PTO controls. Adding Electrical Options WARNING! Follow the engine manufacturer’s guidelines for use of these circuits.
See your engine manufacturer to verify that the engine is programmed correctly for the intended applications. Failure to properly program the engine or wire these circuits could cause an accident. TABLE 8-3. 2010 Cummins ISX15, ISX12, ISL, PX-8 8-29 08/12 Mating View Contact Function Circuit No.
Common with MX Corresponding Body Builder Harness Circuit Number 1 PTO RESUME GRA3163 K982-YL 2 PTO SET GRA3162 K980-PK 3 COMMON RTN #1 (SWITCH) GRN3115 H795-PK 4 REMOTE THROTTLE SIGNAL BLU3144 Y G845-PU 5 PTO ON / OFF GRA3511 Y K999-GN 6 REMOTE THROTTLE ENABLE GRA3162 GRA3143 7 SWITCHED POWER (IGN) ORN1229 Y ORN1299 8 GROUND WHT1513 Y WHT1513 9 TORQUE LIMIT SWITCH GRA3149 G841-GN 10 REMOTE THROTTLE SUPPLY (5V) VIO3144 G844-PK 11 REMOTE THROTTLE RETURN GRN3144 993-BR 12 REMOTE THROTTLE ON/OFF GRA3143 E718-PK