Kenworth — Kenworth Heavy Duty Body Builder Manual 2012

Section 8 Electrical FACTORY INSTALLED SNOW PLOW LIGHT WIRING This options provides the ability to switch between operating lights mounted on a snow plow versus the standard lights on the hood. A switch is mounted in the dash to allow the operator to select the mode. See Figure 8-31 for the snow plow switch icon. Circuits provided to the body builder are: Park Lamp, Circuit code: YEL2411 RH Turn, Circuit code: YEL2312 LH Turn, Circuit code: YEL2311 Ground, Circuit code: WHT2000 RH High Beam, Circuit code: YEL2122 LH High Beam, Circuit code: YEL2121 LH Low Beam, Circuit code: YEL2111 RH Low Beam, Circuit code:

YEL2112 These 8 circuits are coiled up inside the forward LH rail, the breakout length is 5 meters in length. A relay module containing four relays is mounted under the hood near the washer bottle. See Figure 8-33. FIGURE 8-33. Snow plow icon FIGURE 8-34. 8-43 08/12