OPERATION PARKING THE MACHINE The Komatsu backhoe is set-up to be parked in a secure manor. If you will be leaving the machine for a short or long period of time it is important to use all the security features equipped with your machine. FOR SHORT OR LONG PERIODS OF TIME If you will be leaving the machine for a short period of time, find a flat level surface to park on. Lower the work equipment to the ground and place the directional con- trol in the (N) neutral position. Turn the engine off and remove the ignition key. Set the parking brake.
Parking For Long Periods Of Time The danger of having a small child or an unauthorized person tampering with the machine when it is unattended for a long period of time is quite possible. To avoid an accident follow the same procedures as listed above. The machine is equipped with a series of key operated locks. It is impor- tant that these locks work properly and are used when the machine is unattended for a long period of time. Keep in mind you are responsible for the security of your equipment when it is unattended. Properly locking and securing the equipment will help in protecting it from unauthorized access. Parking Posture The above illustration shows the proper parking posture.
It is important to lower all work equipment and neutralize there con- trols. This includes front end loader, backhoe unit and outriggers. Once the work equipment is lowered, lock the controls. See “SAFETY LOCK USAGE” on page 2-44. 2-50 WB140-2N, WB150-2N