Komatsu — ENGINE

OPERATION ENGINE WB140-2N, WB150-2N 2-61 Trouble Possible Cause Remedy Oil pressure light remains on even with the engine at high idle: • Oil level too low. • Oil filter plugged. • Incorrect oil for the season. • Top off. • Change oil and filter. • Change oil. Cooling system overheating: • Coolant low due to leaks. • Fan belt slipping. • Cooling system blocked. • Radiator fins damaged. • Faulty thermostat. • Radiator cap defective. • Top off and repair. • Check belt tension. • Flush cooling system. • Repair or clean. • Replace. • Replace. Temperature gauge stuck at “H” • Faulty temperature indicator. • Replace. Temperature does not show proper gauge reading: • Faulty thermostat.

• Faulty gauge. • Replace. • Replace. Engine cranks but will not start: • No fuel. • Air in fuel system. • Low compression. • Refuel. • Bleed system. • Adjust valve clearance. White or light blue exhaust gasses: • Too much oil in oil pan. • Unstable fuel. • Correct the oil level. • Change to suitable fuel. Exhaust gasses are black: • Air cleaner clogged. • Faulty injectors or injection pump. • Low compression. • Clean or replace. • Replace. • Adjust valve clearance. Popping noise heard at exhaust stack: • Faulty injectors. • Replace injectors. Abnormal engine noise: • Improper fuel Cetane rating. • Overheating. • Damaged exhaust muffler. • Excessive valve clearance. • Change fuels.

• See “temperature indication”. • Replace. • Adjust valves.