Komatsu — MAINTENANCE AFTER THE FIRST 250 HOURS OF OPERATION

MAINTENANCE MAINTENANCE EVERY 250 HOURS OF OPERATION Perform the following operations together with those to be initiated every 50 HOURS: ADJUSTING FAN BELT TENSION The fan belt can be reached after opening the engine hood (See “ENGINE HOOD” on page 2-25). The test is manual: press belt (1) with a thumb on the indicated point with a force equal to approximately. 98 N (22 lb.); resulting deflection must be approximately 10 - 15 mm (0.4 - 0.6 in). If the deflection exceeds this value, loosen screw (2) that fastens alternator (3) and, with a lever inserted between the engine block and casing, make the alterna- tor slide. Lock screw (2) and check again. Use a 12 mm wrench.

A Fan pulley B Alternator pulley # If the belt is worn, replace it and check tension again after a few hours of operation. 3-36 WB140-2N, WB150-2N