OPTIONAL ATTACHMENTS AUTHORIZED OPTIONAL EQUIPMENT Komatsu machines can be supplied with optional equipment in addition to the standard equipment. If optional equipment is installed and used on your machine, read and study all operations and safety information instructions relating to the optional equipment you will be using. Failure to do so may result in damage to the equipment or injury to the operator. Komatsu cannot be held liable for damage, accident or reduction of machinery performance due to the application and use of unauthorized equipment. Always use authorized equipment on your machine.
BASIC PRECAUTIONS When installing or using optional equipment, always contact your Komatsu Dealer first. Be sure the personnel installing or using the optional equipment are trained and authorized to do so. Listed are some basic safety precautions that must be observed when installing or using optional equipment: Install or remove optional equipment on a firm level surface. Be sure the equipment you are installing is in good operating condition. When operations are performed using two or more personnel, agree to a set communication signals in advance and stick to them.
Always use an overhead crane when lifting equipment weighing more than 25 kg (55 lb.) Be aware, the center of gravity on your machine will change when optional equipment is installed. Make sure your machine is rated for the optional equipment being installed. When using optional equipment be sure all non-authorized personnel are at least 12m (40 ft.) away from your workloca- tion. 5-2 WB140-2N, WB150-2N