OPTIONAL ATTACHMENTS MULTIPURPOSE BUCKET The operations to be performed when installing the multipurpose bucket are the same described in the previous paragraph with changes regard- ing the backward movement and engagement of the pins When installing the quick couplings, be sure the engine is off and all pressure to the quick couplings is released. Operate the controls to relieve all pressure in the system. When installing hook up coupling (10) and (11) Always ware a face shield and gloves to protect your face and hands from hydraulic oil or metal chips. Once the couplings are installed, start the engine and operate the control lever (2), open and close buttons (8) and (9).
Turn the engine off and check for any leaks. See “FRONT END LOADER CONTROLS” on page 2-16. The bucket is opened and closed using two hydraulic cylinders (1) 5-6 WB140-2N, WB150-2N