SAFETY LEAVING OPERATOR’S COMPARTMENT Below are listed procedures that must be followed when exiting the operator’s cab. 1. Park the machine in a level area, lower all work equipment to the ground. 2. Engage the parking brake. 3. Place safety lock lever for loader control in the ( LOCKED ) posi- tion. 4. Place safety lock lever for backhoe controls in the ( LOCKED ) position. 5. Remove ignition key and keep the key with you. 6. Use the key to lock and secure all the equipment locks. This will prevent other unauthorized personnel from tampering with your machine. Keep in mind you are responsible for securing your machine.
Remark Never leave your machine running and unattended, even for a moment. Work equipment posture: See “PARKING THE MACHINE” on page 2-50. Lock:See “SAFETY LOCK USAGE” on page 2-44. 1-4 WB140-2N, WB150-2N