UPPERSTRUCTURE / Pump Device REMOVE AND INSTALL PUMP DEVICE CAUTION: Release any pressure in the hydraulic oil tank before doing any work. (Refer to BLEED AIR FROM HYDRAULIC OIL TANK on W1-4-1.) Removal 1. Open engine cover (2). Remove lock pins (5) (2 used) and washers (4) (2 used). Remove stays (3) (2 used) from the bracket. Lay down engine cover (2) to the muffler cover (1) side. CAUTION: Engine cover (2) weight: 32kg (70 lb) 2. Remove bolts (7) (8 used) from hinges (6) (4 used). Remove engine cover (2) from bracket (8). : 17 mm 3. Remove bolts (10) (8 used). Remove Muffler cover (1). W1J1-02-13-020 W1J1-02-13-015 10 1 :
19 mm W1J1-02-13-003 W2-4-1 1 2 W1J1-02-13-001 8 3 4 5 7 Bracket 6 Bracket 8 3 4 5 7 6