UPPERSTRUCTURE / Pump Device 9. Remove socket bolts (1) (4 used). Remove cover (2) from swash plate stand (27). : 6 mm 10. Remove swash plate stand (27) from housing (15). When swash plate stand (27) cannot be removed, tap and remove swash plate stand (27) by using a plastic hammer. 11. Remove swash plate (29) and shoe plate (31) from housing (15). 12. Remove shaft (5) from swash plate stand (27). When shaft (5) cannot be removed, tap and remove shaft (5) by using a plastic hammer. IMPORTANT: LOCTITE has been applied onto the contacting part between tilt pin (16) and servo piston (22). When disassembling, do not damage servo piston (22). 13.
Remove stoppers (12, 19), servo piston (22) and tilt pin (16) from housing (15). 14. Remove retaining ring (8), spacers (7) (2 used) and bearing (6) from shaft (5). W2-4-51