UNDERCARRIAGE / Center Joint Assemble Center Joint IMPORTANT: The clearance between body (7) and spindle (2) is not much. Align the center of body (7) and spindle (2) and install body (7) straightly. As the seal may be damaged, slowly install body (7). Install body (7) in order not to form the step at position A (the mounting position for ring (8)) shown below. IMPORTANT: Apply grease to the bushing (5) mounting part on body (7). 1. When bushing (5) is removed, first install bushing (5) to body (7). (Refer to page W3-3-10.) IMPORTANT: Apply grease to the dust seal (3) mounting part on body (7). Face the metal part of dust seal (3) to the body (7) side. 2.
Install O-ring (4) and dust seal (3) to body (7). Metal Part 3 A 2 7 W800-03-03-001 3. Install oil seals (6) (6 used) to body (7). 7 W800-03-03-002 W3-3-7