UNDERCARRIAGE / Upper and Lower Roller Assemble Lower Roller CAUTION: Lower roller (8) weight: ZAXIS450-3, 450LC-3, 470H-3, 470LCH-3: 47 kg (104 lb) ZAXIS500LC-3, 520LCH-3: 61 kg (134 lb) Axle (2) weight: ZAXIS450-3, 450LC-3, 470H-3, 470LCH-3: 20 kg (44 lb) ZAXIS500LC-3, 520LCH-3: 29 kg (62 lb) 1. Install bushings (7) (2 used) to roller (8). Do not dent the flange surface of bushing (7). Apply much grease to O-ring (3) and install O-ring (3) to axle (2). CAUTION: The axle (2) assembly weight: ZAXIS450-3, 450LC-3, 470H-3, 470LCH-3: 25 kg (55 lb) ZAXIS500LC-3, 520LCH-3: 38 kg (84 lb) 4. Insert axle (2) into roller (8). Install O-ring (3) with grease applied to axle (2).
Install other collar (4) and floating seal (1) in the same procedures and secure with pin (5). IMPORTANT: Align the matching marks made when disassembling. 2. Install one of collar (4) to axle (2). Do not damage O-ring (3). Tap pin (5) into the pin hole and se- cure collar (4) on axle (2). 5 W157-03-06-009 5. Fill engine oil (API CD class SAE30) 1.0 L (0.26 US gal.) via the plug (6) hole on collar (4) on both sides. 3 6. Apply LOCTITE #503 or equivalent to plug (6). Install plugs (6) (2 used) to collars (4) on both sides. W16J-03-06-001 : 6 mm CAUTION: Lower roller (8) assembly weight: ZAXIS450-3, 450LC-3, 470H-3, 470LCH-3: 80 kg (176 lb) ZAXIS500LC-3, 520LCH-3: 108 kg (238 lb) 3.
Apply grease to the O-ring part on floating seal (1). Install floating seal (1) to roller (8) and collar (4). : 20 N m (2 kgf m, 14.5 Ibf ft) 5 8 6 4 W105-03-06-024 W157-03-06-008 W3-6-11 5 1 2 8 3 4 1 2 8 3 2 4 8 1 1 4