hitachi — REMOVE AND INSTALL TRACK

UNDERCARRIAGE / Track REMOVE AND INSTALL TRACK Removal CAUTION: Grease pressure in the adjuster cylinder is high. Do not loosen valve (2) quickly or too much as valve (2) may fly off or high-pressure grease in the cylinder may gush out. Keep body parts and face away from valve (2) and loosen valve (2) carefully. Do not loosen grease fitting (1). 1. Loosen valve (2) in the track adjuster and drain grease. 2. Rotate the track so that master pin (3) is positioned at the upper of front idler (4). Place a wooden block under shoe (5) and support shoe (5). 1 2 Adjuster Cylinder W800-03-07-027 NOTE: The heads in both ends of master pin (3) are the stepped-shape.

The heads of other pins are the flat-shape. As master pin (3) is symmetrical, master pin (3) can be removed from and installed to both directions. W3-7-1 4 3 5 4 Wooden Block W105-03-07-006 Flat 3 With Step Pin W800-03-07-004 3 With Step Pin