hitachi — ASSEMBLE CYLINDERS

FRONT ATTACHMENT / Cylinder Assemble Arm Cylinder, Bucket Cylinder 1. Install bushing (9) to cylinder head (3). Install retaining ring (10). Special tool when installing bushing: Arm cylinder ST 8023: 135 mm (5.3 in) Bucket cylinder ST 8036: 120 mm (4.7 in) IMPORTANT: Install buffer ring (8) with the lip facing to the cylinder bottom side. 2. Install buffer ring (8) to cylinder head (3). IMPORTANT: Install U-ring (7) with the lip facing to the cylinder bottom side. 3. Install backup ring (6) to cylinder head (3). Install U-ring (7). 4. Install slide ring (5) to cylinder head (3). IMPORTANT: Install wiper ring (2) with the lip facing to the outside. 5.

Install wiper ring (2) to cylinder head (3). Arm cylinder ST 8023: 135 mm (5.3 in) Bucket cylinder ST 8036: 120 mm (4.7 in) 6. Install O-ring (12) and backup ring (11) to cylinder head (3). 7. Install seal ring (20) to piston (17). Special tool when installing seal ring: Arm cylinder: ST 2971 Bucket cylinder: ST 2970 IMPORTANT: Install slide rings (18, 19) with their slits positioned 180 degrees each facing the opposite of each other. 8. Install slide rings (18, 19) (2 used for each) to piston (17). 9. Install special tool to piston (17). Retract seal ring (20) and slide rings (18, 19). Special tool: Arm cylinder: ST 2971 Bucket cylinder: ST 2970 CAUTION: Cylinder rod (1) weight:

Arm cylinder: 275 kg (606 lb) Bucket cylinder: 170 kg (375 lb) 10. Secure cylinder rod (1) to special tool (ST 5908). ST 5908 W158-04-02-022 W4-2-25