GENERAL PRECAUTIONS 2.2.6 GETTING ON AND OFF THE MACHINE Do not jump on or off the machine, either when it is at rest and when it is moving. When getting on or off the machine, always use the appropriate handles and footboards; get on and off the machine very care- fully. Never hold or rest on the control levers. Either when getting on and when getting off the machine, always maintain three points of contact (holding or resting poin- ts), in order to avoid losing your balance and falling down. RWA31650 Clean the handles and footboards if they are dirty with oil or gre- ase. Carefully clean the cab floor if it is dirty with oil, grease, mud or rubble.
RWA18670 2.2.7 CHECKING THE REAR-VIEW MIR- RORS (if installed) Make sure that the rear-view mirrors are clean and correctly di- rected; the operator must be able to check the area behind the machine with no need to move the trunk with respect to his nor- mal operating position. If the rear-view mirrors should move or break during the opera- tions, stop the machine immediately and fix or change them. Working without checking the area behind the machine involves the risk of running over persons who have incautiously approa- ched the machine or colliding with fixed obstacles or manoeu- vring vehicles. RWA21900 RWA31920 29